All Scare .com Makers of Fine Monstrocities Call Now 914-347-6439
Home Video Gallery
The BodyFrame System
Animatronic Characters
Body Kits (To Create Your Own)
Body Frames (Bones)
Cylinders (Muscles)
Control Valves (
Animatronic Characters
Pneumatic Components
Heads Masks
Specialty Items
Pricing & Ordering
Contact Us
Volume Discounts Available!
Speed Control Valve Stainless Steel Tube Fitting Compression Fitting Directional Valve Solenoid Valve Air Actuated Valve Manual Air Valve Air Pressure Regulator Air Cylinder
1 Push In Fitting 2 Metal Fitting 3 Comp. Fitting 4 Solenoid Valve 5 Process Valve 6 Actuated Valve 7 Air Valve 8 Air Regulator 9 Air Cylinder

Solenoid Valve Specifications and Dimensions: 3S035 Series


Valve Model

3S035

Valve Type

3 Way Normally Closed (NC) or Normally Open (NO)

Action

Direct Acting

Cv (Orifice)

0.5 (3.5mm NC Port, 2.5mm NO Port)

Operating Pressure (PSI)

0  to 80 PSI

Operating Temperature (°C)

-10 to 120°C 

Port Size (NPT)

1/4

Body Materials

Stainless Steel

Seal Materials:

Viton (Options: EPDM, NBR)

Coil Protection Insulation Class

H Class IP65 

Coil Duty

100% ED

Coil Power

14W

Electrical Connections

DIN

Service

Air, Gas, Liquid, Vacuum 

2/3 Direct Acting Solenoid Valve Normally Closed (3S035 Series)

As shown below, when the valve is de-energized (left diagram), the plunger under the force of spring seals the main orifice, and port CYL connects with port EX. When the valve is energized (right diagram), the coil magnetic force pulls back the plunger and closes port EX, and connects port IN to CYL.

 

To operate the 3S035 as a normally open diverter , you need to connect the supply air to Port No 1. The Top Port is the normally open port and Port No. 2 is the normally closed port. In the configuration, air goes from Port No. 1 to the Top Port when the valve is de-energized. When it is energized air will go from Port No. 1 to Port No. 2 and the Top Port will be shut off. 

To operate the 3S035 as a normally open on/off valve, you need to connect the supply air to the Top Port. The Port No.1 is the normally open port. In the configuration, air goes from the Top Port to Port No. 1 when the valve is de-energized. When it is energized the Top Port is shut off, and Port No. 1 will be exhausted to Port No. 2. To operate the 3S035 as a normally open diverter , you need to connect the supply air to Port No 1. The Top Port is the normally open port and Port No. 2 is the normally closed port. In the configuration, air goes from Port No. 1 to the Top Port when the valve is de-energized. When it is energized air will go from Port No. 1 to Port No. 2 and the Top Port will be shut off.


3 way direct acting valve3 way valve symbol


Electrical Coil Connections

For DIN Coil

To connect DIN coil:
1. Remove the Philip screw from the plastic housing and unplug it from the DIN coil.
2. From the screw opening, push the terminal block out from the plastic housing.
3. Note the 1, 2 and ground markings on underside of DIN enclosure.
4. For DC DIN Coil, Connect 1 to Positive, 2 to Negative.
5. For AC DIN Coil, connect 1 to HOT wire, 2 to Neutral wire, and if required connect ground to ground wire.

For Grommet Coil

To connect Grommet coil:
1.  For DC Coil, connect one of the two wires to Positive, and the other wire to Negative.
2. For AC Coil, connect one of the two wires to HOT wire, and the other wire to neutral wire.

  Need Help? Our Experts are here to help! Call Now! (914) 347-6439
Home - The BodyFrame System - Pricing and Ordering - Contact Us
Copyright ©2009-2014 All Air, Inc. All Rights Reserved. Website by J. Krowles Graphic Arts www.krowles.com