All Scare .com Makers of Fine Monstrocities Call Now 914-347-6439
Home Video Gallery
The BodyFrame System
Animatronic Characters
Body Kits (To Create Your Own)
Body Frames (Bones)
Cylinders (Muscles)
Control Valves (
Animatronic Characters
Pneumatic Components
Heads Masks
Specialty Items
Pricing & Ordering
Contact Us
Volume Discounts Available!
Speed Control Valve Stainless Steel Tube Fitting Compression Fitting Directional Valve Solenoid Valve Air Actuated Valve Manual Air Valve Air Pressure Regulator Air Cylinder
1 Push In Fitting 2 Metal Fitting 3 Comp. Fitting 4 Solenoid Valve 5 Process Valve 6 Actuated Valve 7 Air Valve 8 Air Regulator 9 Air Cylinder

Solenoid Valve Specifications and Dimensions: 2L170-500 Series


Valve Model

2L170-3/8 2L170-1/2 2L170-3/4 2L200-1

2L300-1 1/4

2L300-1 1/2

2L500-2

Valve Type

2 Way Normally Closed (NC)

Action

Pilot Piston

  Cv 4.8 4.8 4.8 12 24 29 48
  Orifice (mm) 17 17 17 20 30 30 50

Operating Pressure

7  to 232 PSI (0.5 to 16 bar) 25°C

Operating Temperature

23 to 356 °F (-5 TO 180 °C) with PTFE Seal

Port Size (NPT)

3/8 1/2 3/4 1

1 1/4

1 1/2

2

Body Materials

Brass

Seal Materials:

PTFE

Coil Protection Insulation Class

H Class IP65 

Coil Duty

100% ED

Coil Power

30-40W

Electrical Connections

DIN

Service

Air, Gas, Liquid, Vacuum  Steam

ALL Standard valves are supplied with CONTINUOUS DUTY COILS of the proper class of insulation for the service indicated on the valve. The coil temperature may become hot after being energized for extended periods, but it is normal. Smoke or burning odor indicates excessive coil temperature and should disconnect the power to the coil immediately. 

VOLTAGES: Standard: 12-24V DC and 24-110-220-230V/50-60 Hz AC. Voltage tolerances: +10% –5% for DC, +10%-15% for AC; .

SERVICE LIFE: The service life of the solenoid valve depends on the operating conditions such as pressure, temperature, type of medium and the voltage.

Electrical Coil Connections

For DIN Coil

To connect DIN coil:
1. Remove the Philip screw from the plastic housing and unplug it from the DIN coil.
2. From the screw opening, push the terminal block out from the plastic housing.
3. Note the 1, 2 and ground markings on underside of DIN enclosure.
4. For DC DIN Coil, Connect 1 to Positive, 2 to Negative.
5. For AC DIN Coil, connect 1 to HOT wire, 2 to Neutral wire, and if required connect ground to ground wire.

For Grommet Coil

To connect Grommet coil:
1.  For DC Coil, connect one of the two wires to Positive, and the other wire to Negative.
2. For AC Coil, connect one of the two wires to HOT wire, and the other wire to neutral wire.

2L Series 2/2 Direct Lift Piston Normally Closed Solenoid Valve: 
Description & Operation:
2L series valves are 2 way  normally closed, internal PILOT PISTON solenoid valves and require 7 minimum psi OPERATING PRESSURE DIFFERENTIAL to operate. When the coil is energized, it lifts the pilot valve off the pilot valve seat, opening the pilot orifice through the center of the piston to the outlet side of the valve. This relieves the pressure from the top of the piston ring and pressure under the piston ring forces the piston up to open the main valve orifice. When the coil is de-energized, the pilot valve returns to close the pilot orifice and pressure across the piston ring is equalized through a timing orifice in the side of the piston or in the valve body. The piston spring returns the piston to close the main valve orifice.


 

  

MODEL: 2L Series (UNIT=MM) 

PORT CENTER LINE
TO TOP

WIDTH

HEIGHT

LENGTH

Port (NPT)

2L170-10

125   

42

146

82

 3/8

2L170-15

125   

42

146

82

 1/2

2L170-20

125   

42

146

82

 3/4

2L200-25

136   

52

162

91

1   

2L300-35

148   

74

185

111

1 1/4

2L300-40

148   

74

185

111

1 1/2

2L500-50

176   

86

223

163

2   

  Need Help? Our Experts are here to help! Call Now! (914) 347-6439
Home - The BodyFrame System - Pricing and Ordering - Contact Us
Copyright ©2009-2014 All Air, Inc. All Rights Reserved. Website by J. Krowles Graphic Arts www.krowles.com